Specifications

Level One: Protege GX Installer Study Guide | August 2013 369
 Press to select an input.
Pressing while the display shows all 0s will display the first input on the Controller (usually Input 1 on
the Controller).
 The first line displays the first 16 characters of the input name as recorded at the server.
 The second line shows the current state.
OfficeEntryDr
isCLOSED
Note: This display is dynamic and updates in real time as the input changes state.
 Press the and keys to cycle through the inputs.
 Press the key to switch between Input name and Input address
CP001:01Zone
isCLOSED
 Press the key to return to the input number selection screen.
Trouble Input View Menu
Press [4] [1] [2]. The Trouble Input View menu allows you to view the current state of a trouble input.
Troublezoneto
view:000000‐
As with the Input View menu, you'll be prompted to enter a trouble input number. This number refers to the
order the trouble input is stored at the Controller and doesn't relate to the server database.
Navigation is carried out in the same way as with inputs.
Output View Menu
Press [4] [1] [3]. This takes you to the Output View menu allowing you to view the current state of an
output.
SelectPGMto
view:000000
 As with the previous menus, you'll be prompted to enter an output number.
 Navigation is carried out in the same manner.
Outputs can also be controlled from this menu. You'll notice that the [1] key has the word ON next to it and the
[2] key has OFF next to it.
 Pressing the [1] key will turn the output ON.
CP001:Bell0
isON
 Pressing the [2] key will turn the output OFF.
CP001:Bell0
isOFF