Specifications

Level One: Protege GX Installer Study Guide | August 2013 349
Services
Services provide interaction between Protege GX and external systems. Services include:
 ContactID
 SIA
 Report IP
 and many other options for automation and control
Services run on Protege GX Controllers, so are not reliant on the Protege GX Server.
Configure the Contact ID Service
1. Navigate to Programming | Services
2. Select your Controller then click Add to create a new service
3. Set the Service Type to ContactID
4. Set the Service Mode to Start with Controller. This ensures that the service is started automatically
whenever power is cycled to the controller. If left at Manual Mode, the service will need to be manually
starting each time the controller is reset or restarted.
5. Select the General tab:
 Enter the Client Code (or account number) as supplied by the monitoring station.
If the Controller must dial a number to gain an outside line (for instance, 1 or 9), create a separate phone
number, then select it as the PABX Number.