Specifications

Level One: Protege GX Installer Study Guide | August 2013 345
And finally, we'll add the new System area to our status page:
1. Select the All Doors and Areas Status List
2. Click Add to open the Select Devices window
3. Set the Device Type to Area and choose your Controller
4. Check the new System area and click OK
5. Save your changes
If your status page is already open, you will need to close it and open it again for the changes to take place.
Arm the System Area
From the Technician status page, arm the 24hr portion of the System area.
You should see some Trouble Inputs create alarms: