Specifications

330 Module 135: Configuring Intruder and Access Integration | Configuring Warehouse Access
Testing the Doors
 Badge Card 2 at the Warehouse Roller entry reader
You will see that an Entry event is generated.
 Badge Card 2 at the Warehouse Roller exit reader
You will see that an Exit event is generated.
 Badge Card 2 at the Office to Warehouse entry reader
 Badge Card 2 at the Office to Warehouse exit reader
Basic door configuration has already been completed...
 Double badge Card 2 at the Office to Warehouse exit reader - the Office area should begin to arm
 Double badge Card 2 at the Office to Warehouse entry reader - the Warehouse area should begin to arm
Basic area integration is also working...
With both areas now armed, you should see that warehouse users are not allowed in the office and that office
users are not allowed in the warehouse.
Warehouse Door Type
We have not set the Warehouse Roller door type correctly yet as it needs to be configured for Card and PIN
access on the outside...
 Navigate to Programming | Doors
 Select the Warehouse Roller door
 Set the Door Type to Card and PIN
 Save your changes
 Wait a few seconds and try badging Card 2 at the Multiprox reader
Card and PIN mode should now be set.
Badge Card 2 at the Warehouse Roller exit reader. You'll see a denied waiting for PIN event:
This is because our door type has applied Card and PIN to both the entry and exit doors. What we actually
need is a door type that has Card and PIN on entry, and Card on exit.
It is good practice to leave the default door and input types unchanged and to create new types if different
functionality is required. This means that you have a known reference you can return to if you need to
troubleshoot any problems.