Specifications

Level One: Protege GX Installer Study Guide | August 2013 285
Adding Cards from the Event Log
Badge the first training tag at the MultiProx reader. You should see an event come through, telling us that an
unknown card has been read on Port 1
The numbers in the brackets at the end of the event - in this example (99:1) - represent the Facility Code and
Card Number
1. Right click on the event
2. Select Add Card Number to Existing User
3. Select the user you wish to add the card to then click OK
4. Once the download is complete, badge the card again. You should be granted entry to the door.
Note that Lock 1 output is turned on, then off again 5 seconds later
5. Try badging again, and observe the LED indicators
1. The R1 LED should pulse for 1 second during card read (correct format data read)
2. The RELAY 1 LED should pulse for 5 seconds