Specifications

Level One: Protege GX Installer Study Guide | August 2013 281
Review Questions
A short time after creating a new area, a health status message appears on the controller.
What is this likely to be?
 The area is missing an Input Type
 The Controller requires a module update
 The new area has its Tamper or 24 hour area disarmed
 The area has no inputs programmed yet
Which characters from the area name programming will be shown on the keypad?
 The last 16 characters of the programmed name
 The first 20 characters of the programmed name
 The last 20 characters of the programmed name
 The first 16 characters of the programmed name
Explain the result of the setting shown in this image
 The output will never be activated as the pulse times are both set to 0
 The output will be activated constantly when an entry delay input is triggered
 The output will be activated constantly while the area is arming
 The output will pulse rapidly while the area is arming
How many areas can an input be programmed to?
 One
 Two
 Four
 It depends on whether it is on a Reader Expander