Specifications

266 Module 133: Basic Intruder Detection | Programming Areas

Disarming the 24 Hour Area

The 24 hour or tamper portion of an area can be armed and disarmed at the keypad by any user that has an

appropriate menu group.

Once the area status is displayed, press the left arrow key.

Office

24HREnabled

You can now use the [Arm] and [Disarm] keys to control just the 24 hour portion of the area.

Programming Additional Areas

Based on ACME's requirements, we need to

create additional areas as follows:

 Warehouse

 Managers Office

Configure the Timings and Bell Output the

same as the Office area, but leave the

exit/entry delay and disarmed/armed outputs

at the default values (not set). These areas

don't have a keypad, so these settings are not

required.

Warehouse

Office

Manager

Don't forget to use our consistent naming convention.