Specifications

196 Module 129: Protege GX Software Introduction | The Protege GX User Interface
The Record List
The Record list is the panel shown on the left of the screen and is used to display a list of records within the
current database. For example, when programming Inputs, the Record List displays a list of all Inputs that are
currently programmed.
The Record list contains one or more of the following columns:
Column Description
Name The primary language name given to the record.
Controller The name of the Controller that the record belongs to.
Database ID This is the Database ID. It is a unique ID across the whole system and is used to identify
the record in the event log. For example, the event log below shows an input identified
as (ZN23). This means it has a database address of 23 and has no relation to the
physical input number on the Input Expander.
Module Type Identifies the type of module this record belongs to. For example, if the module type is
shown as Controller, the record is physically connected to a Controller.
Module Address Identifies the hardware address of the module the record belongs to. For example, if the
record has a Module Address of 1, it refers to the hardware expander that is physically
addressed as Module 1.
Module Input/Output Identifies the hardware position of the device this record is configuring. For example, if
the record has a Module Input of 1, it refers to input number 1 on the physical hardware
device.
Created Date The date and time that this record was first created.
Last Modified The date and time that this record was last modified.
Last Modified By The operator that made the last modification to this record.