Specifications

162 Module 125: Protege GX System Design | Review Questions
Review Questions
Where should copper clad aluminium cables be used?
For Reader connection
For RS-485 Module Network connection
CCA cables should be used wherever possible due to its higher attenuation
The use of CCA cables should be avoided
If the keypad cable was damaged, causing a short across all conductors, what would
happen?
Cabinet
ZX16 RDI2
PSU Controller
Primary RS-485 Secondary RS-485
Keypad
The Keypad would stop functioning. The RDI2 would stop functioning. Everything else would continue
to function properly.
The Keypad would stop functioning. Everything else would continue to function properly.
Everything would continue to function properly.
The Keypad would stop functioning. The RDI2 would go into offline mode. Everything else would
continue to function properly.
In Offline Operation...
A front door of a retail shop is connected to an RDI2-DIN intelligent reader expander which is programmed for
'First 10 Users + Cache' mode. The door is programmed to unlock at 9am and lock at 5 pm. Jane, one of
the shop staff, is programmed as User 202. If the expander was to go offline at 5am, what would happen?
The door would not unlock at 9am. Jane would be granted access.
The door would not unlock at 9am. Jane would not be granted access.
The door would unlock at 9am. Jane would be granted access.
The door would unlock at 9am. Jane would not be granted access.