Specifications

Level One: Protege GX Installer Study Guide | August 2013 143
Review Questions
How do you default a DIN Rail Controller?
 Use the web interface to connect to the Controller, then click on Restart
 Wire a link between D0 and L1 of reader port 2, then cycle power
 Turn on DIP switch 4, then cycle the power
 Log in at a keypad, then select [Menu] [4] [2] [2] [Enter]
If the IP address of a DIN Rail Controller is unknown, how can you find it?
 Turn DIP switch 3 on, then cycle power to the Controller to temporarily set the IP address to
192.168.111.222
 Connect a keypad, press [Menu] [4] [Arm], then scroll down three times
 Use the web interface to browse to the default IP address of 192.168.1.2
 Connect a link from L1 to D0 on reader port 2, then cycle power to the Controller to temporarily set the
IP address to 192.168.111.222
What is the default IP address of a DIN Rail Controller
 192.168.1.2
 192.168.1.3
 192.168.111.222
 255.255.255.0
When the IP address of a Controller is changed, what additional step(s) must be taken?
 Perform a module update
 Save the settings
 Cycle power to the Controller
 Save the settings, then restart the Controller
If the IP address of a PCB Controller is unknown how can you find it?
 Turn DIP switch 3 on, then cycle power to the Controller to temporarily set the IP address to
192.168.111.222
 Connect a keypad, press [Menu] [4] [Arm], then scroll down three times
 Either of the above
 Connect a link from L1 to D0 on reader port 2, then cycle power to the Controller to temporarily set the
IP address to 192.168.111.222