Specifications

Level One: Protege GX Installer Study Guide | August 2013 141
Keypad Configuration
Accessing the Configuration Menu
Before the Protege LCD Keypad module can communicate, it must be assigned an address. This, and other
settings, are configured using the device configuration menu:
1. Apply power to the device and when the keypad version information is displayed, press the
X
key
followed by the
key
2. The configuration menu is displayed
3. Scroll the available options by pressing the
and keys and use the key to select the menu
item.
The configuration menu can only be accessed when the device powers up. It cannot be accessed when the
system is operational.
Setting the Keypad Device Address
The address selection sets the address of the LCD Keypad. This address must be a unique address in the
system below address 250.
Enterkeypad
address:001
 Use the numerical keys 0 to 9 to program the address and press the key to save the setting.
 To exit without making changes press the key.
Adjusting the Display Contrast
The display contrast setting adjusts the LCD display contrast settings.
Contrast
[*******]
 Use the and keys to adjust the contrast and press to save the setting.
 To exit without making changes press the key.
Resetting a Keypad to Factory Defaults
The default setting resets the keypad to the factory default settings.
Press[ENTER]to
defaultkeypad.
 Press to default the keypad.
 To exit without defaulting the keypad press the key.