Specifications

134 Module 130: Protege GX Hardware Setup | DIN Rail Controller Setup
DIN Rail Controller Setup
To bring a DIN Rail Controller online with your Protege GX Server, the appropriate IP address, subnet mask and
gateway (if applicable) must be assigned.
The DIN Rail Controller has a factory default IP address of 192.168.1.2 and this should be changed to suit the
IP addressing scheme of your site. The IP address can be changed using the built in web interface, or from a
keypad.
Assigning the IP Address via the Web Interface
If the current IP is known, the recommended method is to connect to the built in web interface to edit the
settings.
1. With the Controller connected to your network, type the current IP address into the address bar of your web
browser. The default IP address is 192.168.1.2.
2. A login screen appears. Enter the user name and password:
The default user name is admin.
The default password is admin.
3. The Controller Configuration screen is displayed:
4. Enter the required settings, and click Save.
5. Restart the Controller.