Specifications

Level One: Protege GX Installer Study Guide | August 2013 131
The Bell indicator on a DIN Controller is flashing two green flashes. What does this
mean?
 The Bell output is off. The circuit to the bell is ok.
 The Bell output is off. The circuit to the siren / bell is cut, damaged or tampered.
 The Bell output is on. The circuit to the bell is ok.
 The Bell output is on. The circuit is in over current protection.
What does a flashing green indicator on an input mean?
 The input is in an open state
 The input is in a closed state
 The input is in a tamper state
 The input is in a short state