Specifications

Level One: Protege GX Installer Study Guide | August 2013 127
Output Current Indicator
The Output Current indicator will show the status of the output current for both V1+ and V2+.
State Description
Constantly on
Output current exceeded. Over Current
Shutdown Activated
Continuous flash
Output current exceeded maximum,
approaching Over Current Shutdown
Constantly on (all indicators) Maximum output current level reached
Constantly on (partial) Indicated output current level reached
Output Current Influence on Output Load Operation
In addition to the comprehensive front panel diagnostic indicators, the following table illustrates how the total
output current drawn from the Power Supply will influence the operation of the V1 and V2 Outputs.
Output Load Current
Output Load Operation Status 0 ~ 4.0A 4.0 ~ 5A 5A ~ Short Circuit
Outputs Enabled (Mains Power)




Outputs Supplied by Battery




Output Over-Current Failure Trouble
Input Activated




Over-Current Output Shutdown
Activated


Controller Indicators
Ethernet Link Indicator
The Ethernet indicator shows the status of the Ethernet connection.
State Description
On (green)
Valid link with a hub, switch or direct connection to a personal
computer detected
Flashing (green) Data is being received or transmitted
Off Ethernet cable not connected, no link detected