User manual

63 Prote
g
e™ Inte
g
rated System User Manual
Select the area group add/modify sub
menu item located in the main menu
[ , , ]. This will take you to the
screen asking to select an area group
number to modify. The first area group
number will be shown. The cursor will be
located over the first number.
To modify the name use the numerical
keys. Refer to the Text Entry Section on
Page 12. Press enter key to save
the name and move to the next
programming screen. Press the key
to clear the name or to recall the current
name press the key.
The display will show the schedule
programming. A schedule defines when
this area group will be valid. A setting of
none will disable schedule verification.
Use the and keys to scroll the
records. The arrow
Î on the top line
indicates it is a scroll selection entry
screen.
The display will show the secondary area
group selection. A secondary area group
if programmed will be used if the
assigned schedule is not valid. This
allows an access level to be assigned
area groups based on the time of the
day. By default this is set to None and is
disabled if a schedule of none is
programmed. Use the and keys to
scroll the records. The arrow Î on the
Area group to
modify: AG001
AG010 Name
Admin Areas
AG010 Schedule Î
None
AG010 SecondaryÎ
None