Specifications

98 PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
Reader Expanders | Reader 1-2 Options
 Enable Beam Function On Input: When enabled, the reader expander will process the sense input for
beam control. Beam control allows the reader expander to control an automatic gate which must have its
contacts held open even if the pathway is blocked. When disabled the reader will not perform beam
processing.
 Invert Door State Control: When enabled, the door contact input is inverted. This does not affect the input
functionality if it is being used. When disabled door contact functions normally.
 Invert Sense State Control: When enabled, the reader will invert the bond sensing input. When disabled
bond sensing will operate normally.
 Invert REX Input: When enabled, the reader will invert the request to exit input. When disabled REX input
will operate normally.
 Invert REN Input: When enabled, the reader will invert the request to enter input. When disabled REN input
will operate normally.
 Always Allow REX: When enabled, the reader will always allow a request to exit event even if the door is
forced open. This will not restart the forced door or the door alarm operation. When disabled REX input will
operate only when the door is closed.
 Recycle Door Open Time on REX: When enabled, the reader will extend the door open time when the
REX is received. The REX must be received during the normal open time or during the pre-alarm time for the
timer to be recycled. Pressing the request to exit once the door has been open too long will require that the
door be closed. This option will not affect the ability for the request to exit action to unlock the door. When
disabled REX input will not alter the door open time once the door as been opened.
 Forced Door Sends Door Open: When enabled, the reader expander will process door forced open
events as door open events. When disabled the reader will process forced door events as normal.
 Disable Red LED Processing: When enabled, the reader expander will not control the Red LED (L2) and
the output can be used for another function, this is particularly useful if the attached proximity reader LED's
is controlled with one wire. When disabled the reader will turn on the Red LED when the door is locked.
 Disable Green LED Processing: When enabled, the reader expander will not control the Green LED (L1)
and the output can be used for another function, this is particularly useful if the attached proximity reader
LED's is controlled with one wire. When disabled the reader will turn on the Green LED when the door is
unlocked.
 Disable Buzzer Processing: When enabled, the reader expander will not control the Buzzer Output (BZ)
and the output can be used for another function. When disabled the reader will control the buzzer output.