Specifications

PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
91
Analog Expanders
Analog Expanders are used to connect industrial automation devices to your Protege system.
General
 Name: The name of the analog expander.
Configuration
 Invert Device Tamper: When enabled, the analog expander will invert the module tamper input allowing a
normally open tamper switch to be used. When disabled the analog expander will use the standard normally
closed tamper switch.
 Physical Address: The device address of the Analog Expander.
Input Expanders
Input Expanders extend the number of inputs available within the system.
General
 Name: The name of the input expander.
Configuration
 Physical Address: The device address of the Input Expander.