Specifications

PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
85
Holiday Groups
Holiday Groups are used to prevent (or allow) periods within a schedule from functioning during the holiday
duration.
Select the Holidays tab to add holidays to the group.
 Name: The name of the holiday.
 Repeat: When enabled, the holiday will recur on an annual basis.
 Start Date: The start date of the holiday.
 End Date: The end date of the holiday.
Daylight Savings
Daylight savings periods are associated with a controller. The number of daylight savings periods available will
depend on the number of controllers connected to the system. Programming the daylight saving settings in the
Protege System allows the system to accurately compensate for daylight savings adjustments for the time zone
the system controller is located in.
General
 Name: The name of the Daylight Savings period.
Configuration
 Start Day: Determines the date that daylight savings will start on.
 Start Month: Determines the month that daylight savings will start on.
 End Day: Determines the date that daylight savings will end on.
 End Month: Determines the month that daylight savings will end on.