Specifications

76 PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
 Reporting ID: The Trouble Input Reporting ID allows the installer to program any reporting number to any
trouble input. This provides an extremely high level of flexibility to assign true reporting numbers to the
trouble inputs. A trouble input that is assigned the same reporting ID as another trouble input will result in
both the trouble inputs reporting that ID. If a trouble input is assigned an ID number that is higher than the
maximum number that can be reported by a particular service, the service will use the maximum number
that can be assigned for the format.
Trouble Inputs | Areas and Input Types
Assigned Areas
 Area: The trouble input must be assigned to an area for it to perform any function in the system. By default
ALL trouble inputs are assigned to the predefined trouble area which is the last programmable area in the
system. A trouble input can be assigned in up to 4 different areas. A trouble input can perform a different
function in each area which is defined by the trouble input type.
 Input Type: When a trouble input is assigned to an area the input must be programmed with the type of
trouble input (24 Hour Panic, Burglary Delay, etc).
Trouble Inputs | Options
General Options
 Log to Event Buffer: When enabled, the trouble input will generate an event whenever it is opened or
closed.
 Bypassing Not Allowed: When enabled, the trouble input is a high security trouble input and cannot be
bypassed.