Specifications

72 PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
will be deactivated.
 Preset Module Power Up: When enabled, the state of the output will be set when the module powers up
and will override the current state that is held in the controller.
 Output Turns On When Module Powers Up: Defines the state of the state of the output when the Preset
Module Power Up option is enabled. If enabled, the output will be activated. If disabled, the output will be
deactivated.
 Preset Module Offline: When enabled, the state of the output will be set when the module goes offline.
 Output Turns on When Module Offline: Defines the state of the state of the output when the Preset
Module Offline option is enabled. If enabled, the output will be activated. If disabled, the output will be
deactivated.
Output Groups
Output groups are used to group a number of outputs together and are assigned to an access level and are
used to control the outputs that a user can activate and deactivate.
Select the Outputs tab to add outputs to the group.
Outputs
 The outputs that belong to the output group.