Specifications
52 PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
Door Options
Always Check Unlock Schedule: When enabled the door will revalidate the unlock schedule that it is
assigned each minute. This will prevent the door from being controlled and locked when it should be
unlocked. This option also prevents schedule and area control from operating correctly and if enabled will
prevent the follow inside and follow outside area status from operating. Setting this option will allow the
prevent unlock on arming and normal scheduling operations to occur.
Enable Open/Close Events On Schedule: When enabled the door will not log a door opened event when
it is unlocked on schedule. This will prevent the door from filling the event buffer with events that are not
needed.
Enable Pre-Alarm Events: When enabled the door will generate a pre-alarm event when the pre-alarm
timer for the door is reached.
Enable Left Open Events: When enabled the door will generate a door left open event when the door
maximum open time is reached.
Relock On Door Close: When enabled the door will lock when it detects a door close event and the lock
output is activated.
Unlock Door On REX: When enabled the door will activate the lock output when a request to exit occurs.
Unlock Door On REN: When enabled the door will activate the lock when a request to enter occurs.
Schedule Operates Late To Open: When enabled the Door will not unlock on schedule until the first
access has been accepted at the door.
Door Options 2
Door Lock Follows Inside Area: When enabled the door will unlock if the inside area is disarmed. If no
arm/disarm schedule is set, the Area Disarmed AND Schedule Valid Unlock Door option MUST be enabled
for this function to operate.
Door Lock Follows Outside Area: When enabled the door will unlock if the outside area is disarmed. If no
arm/disarm schedule is set, Area Disarmed AND Schedule Valid Unlock Door option MUST be enabled for
this function to operate.
Prevent Unlock On Schedule If Inside Area Armed: When enabled the door will not unlock when the
schedule is valid if the inside area is armed. Use this option with the late open option to prevent false alarms
by entry of personal before an area is disarmed. This option only operates if the Door Lock Follows Inside
Area and Door Lock Follows Outside Area options are not enabled. To prevent unlocking and locking based
on schedule and area status set the Area Disarmed AND Schedule Valid Unlock Door and Area Disarmed
OR Schedule Valid Unlock Door options to the required values.
Prevent Unlock On Schedule If Outside Area Armed: When enabled the door will not unlock when the
schedule is valid if the outside area is armed. Use this option with the late open option to prevent false
alarms by entry of personal before an area is disarmed.
Area Disarmed AND Schedule Valid Unlock Door: When enabled the door will unlock if the door unlock
schedule is valid AND the inside or outside area is disarmed dependent on the options set for Prevent
Unlock On Schedule If Inside Area Armed and Prevent Unlock On Schedule If Outside Area Armed.
Area Disarmed OR Schedule Valid Unlock Door: When enabled the door will unlock if the door unlock
schedule is valid OR the inside or outside area is disarmed dependent on the options set for Prevent Unlock
On Schedule If Inside Area Armed and Prevent Unlock On Schedule If Outside Area Armed.
Enable Access Taken On REX/REN Events: When enabled the door will generate a Request to Exit (or
Enter) event if the door opens while the door is unlocked from a request to exit. If the door remains closed
an Access Not Taken event will be generated