Specifications

50 PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
Doors | Outputs
Lock Output:
 Lock Output/Output Group: You can assign an output or output group that controls the physical electric
lock for the door. This is typically the lock control output on the reader expander that is being used to
control the door.
 Lock Activation Time: The unlock time determines how long the lock that controls the door will remain
unlocked for when a user accesses the door.
Pre-alarm Output:
 Pre Alarm Output/Output Group: You can assign an output or output group that will activate when the
pre-alarm time that is programmed is reached. Use this to warn users that the door will generate an alarm if
it is left open any longer.
 Pre Alarm Pulse On Time: The pre alarm pulse on time is used to make the output pulse on and off when
activated. The value entered here must be greater than 0 and is in increments of 100ms. For example
setting 10 will pulse the unit on for 1 second and then off for the programmed time set in the pulse off
section.
 Pre Alarm Pulse Off Time: The pre alarm pulse off time is used to make the output pulse on and off when
activated. The value entered here must be greater than 0 and is in increments of 100ms. For example
setting 10 will pulse the unit off for 1 second and then on for the programmed time set in the pulse on
section.
Door Left Open Output:
 Left Open Alarm Output/Output Group: You can assign an output or output group that will activate when
the maximum open time that is programmed is reached indicating that the door has been left open. Use this
to tell users that the door must be closed immediately and that the system has generated an alarm.