Specifications

PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
43
Trouble Inputs
Trouble inputs are used to monitor the status of the Controller and in most cases are not physically connected
to an external input. These can then be used to report a message to a monitoring station, remote computer,
keypad or siren.
The following lists the trouble inputs that are configured in the Controller:
Input Number Description
CP001:02 12V Supply Failure
CP001:04 Real Time Clock Not Set
CP001:05 Service Test Report
CP001:06 ContactID Reporting Failure
CP001:07 Phone Line Fault
CP001:08 Auxiliary Fuse / Supply Fault
CP001:09 Bell Siren Tamper / Cut
CP001:11 Bell Siren Current Overload
CP001:13 Module Communication Fault
CP001:14 Module Security Violation
CP001:20 ReportIP Reporting Failure
CP001:24 Installer Logged In
CP001:29 System Restarted