Specifications

PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
41
V1 Output/V2 Output Indicators
The V1 Output and V2 Output indicators will show the status of the 12VDC output.
State Description
Constantly on 12VDC output operating OK
Constantly off 12VDC output failure
Battery Indicator
The Battery indicator will show the status of the backup battery.
State Description
Continuous flash (red) Backup battery is disconnected
Constantly on (red) Backup battery failed its dynamic battery test
Constantly on (green) Last backup battery dynamic test successful
Temp Indicator
The Temp indicator will show the status of the unit's core temperature.
State Description
Constantly on (red) Core temperature exceeded. Over Temp Shutdown Activated
Continuous flash (red) Core temperature within 15˚C of Over Temp Shutdown
Constantly on (green) Core temperature OK
Over Current Indicator
The Over Current indicator will show the status of the output current for both V1+ and V2+.
State Description
Constantly on Output current exceeded. Over Current Shutdown Activated
Constantly off Maximum output current not exceeded