Specifications

40 PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
Power Supply (PRT-PSU-DIN-2A)
Power Indicator
The Power indicator is lit whenever the correct module input voltage is applied across the AC input terminals.
State Description
Constantly on Correct module input voltage applied
Constantly off Incorrect module input voltage applied
Status Indicator
The Status indicator displays module status of the Power Supply.
State Description
Continuous fast flash (green) Module attempting registration with controller
Continuous slow flash (green) Module successfully registered with controller
Single flash (red) Module communications activity
i
When the fault and status indicators are flashing alternately, the module is in the identification mode,
enabling the installer to easily identify the module in question. Upon either a module update or the
identification time period set expiring, the module will return to normal operation.
Fault Indicator
The Fault indicator is lit any time the module is operating in a non-standard mode.
State Description
Continuous slow flash (red) Module is in boot mode awaiting firmware update
Constantly on (red) Module is in error state
i
When the module is in an error state and the fault indicator is on, the status indicator will flash to
indicate an error code. Refer to the Error Code Display section to determine the error.