Specifications

PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
3
Contents
Introduction ___________________________________________________________________ 6
Operation Mode _______________________________________________________________________ 6
What This Manual Covers ______________________________________________________________ 6
System Expansion and Capacities _______________________________________________________ 6
Technical Specifications ________________________________________________________________ 7
System Installation and Setup ___________________________________________________ 8
Mount the Controller ___________________________________________________________________ 8
Connect the Power Supply _____________________________________________________________ 9
Cabinet Tamper Switch _____________________________________________________________ 11
Connect Networked Modules __________________________________________________________ 12
Module Wiring _____________________________________________________________________ 12
End of Line (EOL) Resistors _________________________________________________________ 13
Connect Card Readers ________________________________________________________________ 13
Standard Card Reader Connection ___________________________________________________ 14
Multiplex Card Reader Connection ___________________________________________________ 14
Connect Door Contacts _______________________________________________________________ 15
Connect Lock Outputs ________________________________________________________________ 16
Connect the Ethernet 10/100 Network Interface __________________________________________ 16
Connect the Telephone Dialer __________________________________________________________ 17
Connect Inputs _______________________________________________________________________ 17
Resistor Value Options _____________________________________________________________ 18
Outputs _____________________________________________________________________________ 19
Bell/Siren Output __________________________________________________________________ 19
Relay Outputs _____________________________________________________________________ 19
Reader Outputs ____________________________________________________________________ 20
Getting Started _______________________________________________________________ 21
Logging In for the First Time ___________________________________________________________ 21
Set the Controller Time ________________________________________________________________ 21
Understanding the Defaults ____________________________________________________________ 22
Using the Protege WX Wizards _________________________________________________________ 23
Expanders ________________________________________________________________________ 23
Access Control ____________________________________________________________________ 24
Security __________________________________________________________________________ 25
Users ____________________________________________________________________________ 28
Configuring Additional Areas ___________________________________________________________ 29