Specifications

24 PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
2. Click Step 2- Auto Detection to continue. The wizard automatically detects the modules and displays them
here:
3. Each module is assigned a name automatically. These can be renamed as required to provide a more
meaningful name for easier identification.
4. Click Save and Return to Menu to finish.
Progress is shown as the Controller is programmed and the corresponding inputs, outputs, and trouble inputs
are created. Once complete, you are returned to the Home page.
Access Control
The Access Control Wizard detects the available reader ports and creates the doors. It also enables you to
assign an unlock schedule to each door which will determine when the door will unlocked. For example, a
typical staff entry door may need to unlock at 8am and be locked again at 5pm. Use the Schedule Operates
Late to Open (see page 51) option to prevent the door unlocking on schedule until the first user accesses the
door. You can use the default Work Hours schedule which you can adapt to suit you needs later, or create your
own schedules (see page 32) first.
1. The wizard automatically detects the reader ports:
2. Use the Rename button to assign your own door names and adjust the Reader Location as required.