Specifications

PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
103
E-mail
 Email: The email address of the operator. Currently only used for information purposes.
 Default Reporting Language: Reserved for future use.
Operator Timeout
 Enable Operator Timeout: Select this option to automatically log the operator out after a period of inactivity
as defined in the Operator Timeout setting below.
 Operator Timeout: Defines the inactivity period at which point Protege WX will timeout and the operator will
be prompted to login again to continue.
Roles
To control the access an operator has to the Protege WX system, they must be assigned a role. The role
determines which pages are visible to the operator when they are logged in. If an option is enabled, that page
will be visible. If it is disabled, the page is hidden.
The system comes programmed with three preset roles. These roles can be customized to meet your specific
requirements however caution should be taken when making changes, particularly to the Installer role, as
removing permissions can prevent an operator from accessing the system.
Operator Role Function
User Can monitor the system and perform basic user configuration
Master Can perform actions required to program and configure the system
Installer Can perform all actions without any restrictions