Specifications

PRT-WX-DIN Using Protege WX Installation and Programming Manual | June 2013
101
Display
 Default Display Line One: The default LCD text for line one is shown on LCD keypads when they are first
connected to the system. This text should be changed to the name of the building, installation or owners
details.
 Default Display Line Two: The default LCD text for line two is shown on LCD keypads when they are first
connected to the system. This text should be changed to the name of the building, installation or owners
details.
 Panel Name: The default LCD panel name that is shown on LCD keypads when they are first connected to
the system. This name will also be used to identify the Controller in the IP reporting services.
Settings | Configuration
Configuration
 Test Report Time (HH:MM): Used in conjunction with the Test Report Time is Periodic option (defined
under Settings | Options (see page 101)) to set the time of the day or the period that the test report trouble
input activates. When the Test Report Time is Periodic option is enabled, the time programmed will be used
as a period between reports in hours and minutes. Otherwise it is treated as a time of day.
 Automatic Offline Time: Allows the panel to update the users and other offline parameters on all intelligent
modules at a set time of the day.
 Module UDP Port: This is the UDP port that all Ethernet enabled modules will communicate with the
Protege Controller over. If this port is changed all modules will also need to be changed.
 Onboard Reader Lock Outputs: Defines the output that will be activated upon successful door access. If
set to none, the lock output (if any) programmed under the associated Reader Expander is used.
 Touchscreen UDP Port: The UDP port that a touchscreen will communicate over.
Settings | Options