Specifications

72 CHAPTER 6: MAINTENANCE
087-0048 REV B SCOTT SAFETY
Figure 50 Test Station Front Panel Bottom View
Test Station
Hardware
(Continued)
Gas leak or damaged
Tygon tubing or
Tygon tubing not
staying on barbs
• Tighten Tygon tubing on Barb.
• Replace Tubing/Barb Kit, item #1 in Figure 50.
Top panel Screws
misplaced or
stripped
• Replace applicable screws, item #25 in both
Figure 51 and Figure 52.
If damaged or lost • Replace Pry Out Plug, item#57 (Stationary) in
Figure 52.
After replacing
various wires and
having to remove
Cable Ties
• Replace Cable Ties. See Table 25.
AC Power Adapter
power appears
intermitted
• Verify Power Jack connection and function.
• Replace AC Power Adapter. See Table 25.
Table 24 Troubleshooting Matrix (continued)
ITEM SYMPTOM/CAUSE SOLUTION
1
2
3
1
4
5
6
7
8
9
8