Specifications

Installation Checklist 21
SCOTT SAFETY 087-0048 REV B
For Windows Vista, perform step 2 prior to beginning installation. For Windows 7
proceed to step 3. For Windows XP proceed to step 4.
1 Prior to installing a higher version of the software, ensure the lower version is
removed. To remove lower version, select Start > Control Panel > Add or Remove
Programs > Scott Safety Test Station Un-install > Remove.
2 For Windows Vista OS, navigate to USER ACCOUNTS AND FAMILY SAFETY
using the control panel and proceed to remove USER ACCOUNT CONTROL
(UAC). The check box must be unchecked for UAC. Restart the PC as necessary.
See Figure 14.
3 For Windows 7 OS, navigate to USER ACCOUNTS using the control panel and
select CHANGE USER ACCOUNT CONTROL SETTINGS. Move the Selector
to the NEVER NOTIFY (lowest level position). Then hit the OK button and next
reboot your PC.
Figure 14 Windows Vista OS Only
4 Download the Test Station Software from our web site. Click SAVE on the File
Download Dialog Box. Next, click SAVE on the Save As Dialog Box, once
location is determined. Next, click OPEN FOLDER on Download Complete
Dialog Box once download complete. Next, Open the .zip file. Next, Extract the
.exe file to the desired location.
5 Navigate to and double click on the setup.msi file. The Select Installation Folder
Dialog Box appears. Either accept default location or browse to custom location.
Then, click NEXT. See Figure 15.