Specifications

14 CHAPTER 3: INSTALLATION
087-0048 REV B SCOTT SAFETY
Installation Checklist This section provides the installation requirements. Table 11 lists the individual items.
Installing .NET
Framework Software
This section describes the installation of the .NET Framework Software, if prompted.
.NET Framework, Version=v4.0 must be installed to use the Test Station Software, and
it should be installed first. If not, a prompt appears. However, it may already be
installed and this procedure may not be necessary.
1 Navigate to and double click on the applicable dotNetFx40stup.exe file. The Open
File Dialog Box appears. Click Run. See Figure 4.
Figure 4 .NET Framework Software Installation (1 of 4)
2 The .NET Framework 4 Setup Dialog Box appears. Read and accept the license
terms. Click INSTALL. See Figure 5.
Table 11 Installation Checklist
ITEM DETAILS
.NET Framework for Test
Station (If prompted)
See “Installing .NET Framework Software” on page 14.
IR Connect Software and
IR Connect
See “Installing the IR Connect Software” on page 16.
Test Station Software and
Test Station
See “Installing the Test Station Software” on page 20.