Specifications

Planning for Installation 13
SCOTT SAFETY 087-0048 REV B
Both the IR Connect and Test Station Software can be downloaded from our Web site:
• https://www.scottsafety.com/en/us/Pages/Softwaredownloads.aspx
Download the IR Connect Software and Test Station Software from our web site.
Click SAVE on the File Download Dialog Box. Next, click SAVE on the Save As
Dialog Box, once location is determined. Next, click OPEN FOLDER on Download
Complete Dialog Box once download complete. Next, Open the .zip file. Next,
Extract both the setup.exe and setup.msi files to the desired location.
Download the applicable software: for the IR Connect (IRConnect_vXXXX.exe
format), for the Test Station (SetupScottSafetyTest Station_vX.X.XX.msi format).
Only one setup file will be installed, based upon your needs. Consult with your IT
Administrator.
Updates to the IR Connect and Test Station Software are typically posted to our Web
site.
The .NET Framework, Version=v4.0 (or higher) software can be downloaded from
this Web site:
• http://msdn.microsoft.com/en-us/netframework/default
Navigate to applicable Web site. Click on DOWNLOAD. The File Download DIalog
Box appears. Click Save. The Save As Dialog Box appears. Click SAVE. Next, click
OPEN FOLDER on Download Complete Dialog Box once download is complete.
Versions of the IR Connect and Test Station Software are included on the CD. You can
check our web site to compare your software version to those posted.
Downloading
Firmware
This section describes how to obtain updates to the monitor and test station firmware,
when required.
IR Connect and Test Station Firmware upgrades occur during the lifetime of the
products. These may be product improvements to add features or to enhance their
performance. You can check our web site to compare your firmware version to those
posted to see if your product has the most current version.
The same firmware is used on all monitors (with or without Hibernate Mode).
Updates to the IR Connect and Test Station Firmware can be downloaded from our
Web site:
• https://www.scottsafety.com/en/us/Pages/Softwaredownloads.aspx
Updates to the IR Connect’s and Test Station’s Firmware are typically posted to our
Web site.
Download the applicable firmware: for the IR Connect (Pro_ZM_vX.X.img format),
for the Test Station (TS-ProZM_vX.X.X.img format).