Specifications

Monitor Overview and Optional System Products 9
SCOTT SAFETY 087-0048 REV B
Figure 3 shows the major parts of the IR Connect.
Figure 3 Major Parts of the IR Connect
Table 10 lists the major parts of the IR Connect.
Table 9 Major Parts of the Test Station
REFERENCE
NUMBER PORTABLE TEST STATION STATIONARY TEST STATION
1 Test LEDs (Unit 1 - Unit 4) Same location
2 Calibration Gas Bottle (Intake) Intake Port located on back panel
3 Exhaust Vent Located on the back panel
4 AC/DC Charger Port Located on the back panel
5 Power LED Same location
6 Pressure Gage Not Applicable
7 Bump Test and Calibration Buttons Same location
8 USB Pen Drive and its Metal Cover Same location
9 IR Communication Ports (1 - 4) Same location
Table 10 Major Parts of the IR Connect
REFERENCE
NUMBER ITEM
1 IR Communications LED (front)
2 USB Cable Port
3 Power LED (front)
1 3
2