Specifications

Monitor Overview and Optional System Products 7

SCOTT SAFETY 087-0048 REV B

• The Protege IR Connect is available for configuring a single monitor, or multiple

monitors in conjunction with the Test Station. It features, a USB Cable, Power and

Communication LEDs. It allows you to quickly configure operating and alarm

parameters for up to four (4) monitor’s housed in the Test Station using the Protege

ZM IR Connect Software.

The monitor ships preconfigured and ready for operation using the factory default

settings. However, you my want to reconfigure some of the parameters based upon

your application. See “Configuring the IR Connect Software Parameters” on page 28.

If you have any questions about the monitor or its operation contact Scott Safety. See

“Technical Service” on page 86.

Figure 1 shows the major parts of the monitor.

Figure 1 Major Parts of the Monitor

Table 8 lists the major parts of the monitor.

Table 8 Major Parts of the Monitor

REFERENCE

NUMBER ITEM

1 LED alarm (top)

2 IR Interface Port (back)

3 LED alarms (2, side)

4 LCD

5 Audible Alarm Port

6 Gas Inlet Port

7 Gas Label