Specifications

2 CHAPTER 1: QUICK REFERENCE
087-0048 REV B SCOTT SAFETY
Typical Quick
Reference
This section provides a brief amount of information for a typical quick reference.
Warning: This is not a substitute for the User Guide. All individuals who have or will
have responsibility of using or servicing the device must read and understand the
contents of the User Guide prior to operation. Failure to do so may result in serious
injury or death.
Powering the Monitor This section describes the power up sequence. See Table 5.
Monitor Alerts &
Messages
This section describes various alerts and displays.Table 6 lists the details.
Table 5 Monitor Power-Up Sequence
ACTION LCD RESULTS
Activating
monitor:
Press and
hold down
the button for
five (5)
seconds.
The monitor starts and runs through a self-test.
• The monitor emits one audible beep
• All LEDs light and monitor vibrates
• All LCD display elements appear
After the full element LCD displays, the low alarm and
high alarm set points display.
When a self-test is successful the monitor turns to the
original screen showing Months with Clock icon and
displays a Check Mark and one short audible beep
sounds.
Table 6 Monitor Alarms and Descriptions
LCD REASON LED BEEPS VIBRATION
Low Alarm 1 slow flash
every second
1 slow beep
every second
1 slow
vibration every
second
High Alarm
and Over
Limit (OL)
Alarm
2 fast flashes
every second
2 fast beeps
every second
2 fast
vibrations
every second