Specifications

92 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Zone Type First Area Assignment
When a zone is assigned to an area the zone must be programmed with the type of zone (Delay, 24HR etc). The
Protege System has twelve predefined zone types as well as user definable zone types.
CP001:01 Type 1
None
Use the [1] and [3] keys to scroll the available zone types that can be assigned to the zone. For more
information about the list control data entry refer to the section List Control Data Entry (see page 335).
Zone Second Area Assignment
The zone must be assigned to an area for it to perform any function in the system and a zone can be assigned
in up to 4 different areas. A zone can perform a different function in each area. For example a zone can be a
delay zone in one area and an instant zone in another.
CP001:01 Area 2
None
Use the [1] and [3] keys to scroll the available areas that can be assigned to the zone. For more information
about the list control data entry refer to the section List Control Data Entry (see page 335).
Zone Type Second Area Assignment
When a zone is assigned to an area the zone must be programmed with the type of zone (Delay, 24HR etc). The
Protege System has twelve predefined zone types as well as user definable zone types.
CP001:01 Type 2
None
Use the [1] and [3] keys to scroll the available zone types that can be assigned to the zone. For more
information about the list control data entry refer to the section List Control Data Entry (see page 335).
Zone Third Area Assignment
The zone must be assigned to an area for it to perform any function in the system and a zone can be assigned
in up to 4 different areas. A zone can perform a different function in each area. For example a zone can be a
delay zone in one area and an instant zone in another.
CP001:01 Area 3
None
Use the [1] and [3] keys to scroll the available areas that can be assigned to the zone. For more information
about the list control data entry refer to the section List Control Data Entry (see page 335).
Zone Type Third Area Assignment
When a zone is assigned to an area the zone must be programmed with the type of zone (Delay, 24HR etc). The
Protege System has twelve predefined zone types as well as user definable zone types.
CP001:01 Type 3
None
Use the [1] and [3] keys to scroll the available zone types that can be assigned to the zone. For more
information about the list control data entry refer to the section List Control Data Entry (see page 335).