Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 89
Selecting a Zone to Modify
Each zone is assigned a unique identification that uses the Protege Notation.
Select zone to
modify: CP001:01
Type the appropriate module type, module address and zone number or use the [Ð] and [Ï] keys to scroll the
available zones. When the desired zone number appears on the screen, press [ENTER] to program the selected
zone number.
Zone Name
If the selected zone has a name associated (some zones do not have a name associated with them) the name
programming screen will be shown.
CP001:01 Name
*Zone CP001:01
To scroll zones by name use the [Ð] and [Ï] keys. To modify or enter a new name for the selected zone use the
keypad as explained in section Entering Text and Names (see page 333) and press [ENTER].
By default the zone name will be prefixed by an '*' this indicates that the name is an editable name in the
system.
Zone Miscellaneous Options
Miscellaneous options for the zone include the configuration of event logging, bypass and arming configurations
for the zone.
CP001:01 Misc
[--------]
To modify options, use the keypad as explained in section Entering Data Options (see page 336).
Option 1 - Log Zone Event
y Enabled the zone will generate an event whenever it is opened, closed, tampered or shorted.
The zone will still perform all functions that are programmed if this is not enabled. When using zones as
automation zones it is recommended to disable the event logging option to reduce the impact on the event
log buffer.
y Disabled the zone will not log an event.
Option 2 - Trouble Condition Display
y When enabled the zone will be monitored for a trouble condition and cause a trouble alarm to be generated.
The trouble will be generated only if the zone is either shorted or tampered.
y Disabled the zone is not monitored for trouble conditions.
Option 3 - Bypassing Not Allowed
y Enabled the zone is a high security zone and cannot be bypassed.
However, the zone can still be force armed if the Force Arming option is turned on. In order to avoid this,
and to insure that the zone is not ignored when force arming, the Zone Force Arming option should be
turned off in the zone type that is assigned to the zone.
y Disabled the zone can be bypassed.
Option 4 - Bypassing Latched Not Allowed
y Enabled the zone is a high security zone and cannot be latch bypassed (Permanent Bypass).