Specifications

52 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Modules
To access the module programming login using a valid installer code and then select [MENU, 4, 1]. You will
then have a menu of modules that you can program in the Protege System. Modules are an important part of
the system and are used to connect the system to Users (LCD Keypad Expander), Zones (Zone Expander),
Card Reading Devices (Reader Expander) and Programmable Outputs (PGM Expander).
LCD Keypad
To access the LCD keypad module programming login using a valid installer code and then select [MENU, 4, 1,
1]. The screen displays "LCD keypad to modify" as shown in the following example.
LCD Keypad to
modify: KP001
Every time you press the Enter key, the next screen appears. The different screens are described in the
following sub-sections. Programming the LCD Keypad allows you to set the polling time of the module as well
as options related to the control of information and the display seen by users on the keypad.
When programming modules some options are processed at the module, for these options to operate correctly
a network update must be performed and the keypad must be registered and online.
Updating modules can be accessed by selecting [MENU, 4, 8, 1, 3], you can also check the status of your
modules by selecting [MENU, 4, 8, 1, 1] for all modules presently offline and [MENU, 4, 8, 1, 2] for all online
modules. For more information refer to the Advanced Menu Section (see page 201).
Modifying some settings within a keypad may prevent a user from gaining access to the keypad. It is possible
that you lock yourself out of the system, ensure that you understand the options that you are setting and that
you always have a system keypad or are able to login remotely using the Protege System Management
Software.