Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 45
Operating Schedule
The operating schedule for the elevator group determines when the elevator group is valid and if it will use a
secondary elevator group if the schedule is not valid. A schedule is a series of times and days that can be
programmed to prevent the operating of functions based on a 7 day week and 24 hour clock. For more
information on the programming of the schedule refer to the Schedule Programming section (see page 272).
EG001 Schedule
None
Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the schedule displayed.
For more information about the list control data entry refer to the section List Control Data Entry (see page 335).
Secondary Elevator Group
A secondary elevator group can be selected that will be used when the schedule of the elevator group that is
programmed is not valid. The schedule of the secondary elevator group must be valid or set to none. The
secondary elevator group allows very powerful elevator group controls to be placed on users during certain
times of the day preventing access to certain elevators.
EG001 Secondary
None
Use the [1] and [3] keys to scroll the secondary elevator group selection and press [ENTER] to select the
elevator group displayed. For more information about the list control data entry refer to the section List Control
Data Entry (see page 335). Programming a secondary elevator group that uses the current elevator group being
edited will perform no function.
Elevator Group Assignment Blocks 1 to 32
The elevator group assignment blocks assign an elevator car to the group that is being programmed. Each
block is 8 elevators and the number of elevator blocks that can be programmed depends on the number of
elevators that the system is configured to manage. For example if there are 16 elevators there will be 2 blocks of
8 elevators. Block 1 option 1 will refer to Elevator 001 and Block 2 Option 8 will refer to Elevator 016.
EG001 Block 1
[12345678]
To modify the block setting options, follow the settings as explained in section Entering Data Options (see page
336). Use the relevant key from 1 to 8 to toggle the elevator for the block.
Pressing the [ENTER] key will move you to the next block in the elevator group until you return to the elevator
group selection.
The following table shows the relationship between the block and the elevator that is being selected for the
elevator group. For example if you want to select Elevator 12 you would go to block 2 and then press [4] to
toggle the option.
Block
#
Opt
1
Opt
2
Opt
3
Opt
4
Opt
5
Opt
6
Opt
7
Opt
8
1 Elevator
001
Elevator
002
Elevator
003
Elevator
004
Elevator
005
Elevator
006
Elevator
007
Elevator
008
2 Elevator
009
Elevator
010
Elevator
011
Elevator
012
Elevator
013
Elevator
014
Elevator
015
Elevator
016
3 Elevator
017
Elevator
018
Elevator
019
Elevator
020
Elevator
021
Elevator
022
Elevator
023
Elevator
024
4 Elevator
025
Elevator
026
Elevator
027
Elevator
028
Elevator
029
Elevator
030
Elevator
031
Elevator
032