Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 41
Area Disarming Group
A user that is assigned an area disarming group will also be able to arm and disarm the areas that belong to this
group.
AL001 Disarm Grp
None
Use the [1] and [3] keys to scroll the area group assigned to the disarm group option and press [ENTER] to
select the area group displayed. For more information about the list control data entry refer to the section List
Control Data Entry (see page 335).
i
The area disarming group will allow arming and disarming of all areas within the group. If a user is
ONLY allowed to arm an area ensure they are programmed only in the arming group and not the
disarming group.
Door Group
A door group can be selected that will be used when the user who is assigned this access level presents their
card to a card reader to gain entry to a door. If the door is programmed in to the door group assigned here the
user will be granted entry. For more information about door groups refer to the section Door Group
Programming (see page 36).
AL001 Door Grp
All Doors
Use the [1] and [3] keys to scroll the door group selection and press [ENTER] to select the door group
displayed. For more information about the list control data entry refer to the section List Control Data Entry (see
page 335).
Menu Group
A menu group can be selected that will be used when the user who is assigned this access level logs in to a
keypad. A menu group of none will prevent a user from being able to perform any functions on a keypad in the
system.
AL001 Menu Grp
All Menus
Use the [1] and [3] keys to scroll the menu group selection and press [ENTER] to select the menu group
displayed. For more information about the list control data entry refer to the section List Control Data Entry (see
page 335).
Elevator Car Group
An elevator car group is assigned to an access level to allow a user to access certain elevator cars that are
programmed in the system. A user must also have a floor group assigned to gain access to the elevator car.
AL001 Elevator
All Cars
Use the [1] and [3] keys to scroll the elevator car group selection and press [ENTER] to select the elevator car
group displayed. For more information about the list control data entry refer to the section List Control Data
Entry (see page 335). For information on Elevator Group programming refer to the section Elevator Groups (see
page 44).