Specifications

40 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Access Level Name
If the selected access level has a name associated (some access levels do not have a name associated with
them) the name programming screen will be shown.
AL001 Name
Master
To scroll access levels by name use the [Ð] and [Ï] keys. To modify or enter a new name for the selected
access level use the keypad as explained in section Entering Text and Names (see page 333) and press
[ENTER].
By default the access level name will be prefixed by an '*' this indicates that the name is an editable name in the
system.
Operating Schedule
The operating schedule for the access level determines when the access level is valid. If the operating schedule
is not valid it will use the secondary access level if it is programmed. A schedule is a series of times and days
that can be programmed to prevent the operating of functions based on a 7 day week and 24 hour clock. For
more information on the programming of the schedule refer to the Schedule Programming section (see page
272).
AL001 Schedule
None
Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the schedule displayed.
For more information about the list control data entry refer to the section List Control Data Entry (see page 335).
Secondary Access Level
A secondary access level can be selected that will be used when the schedule of the access level that is
programmed is not valid. The schedule of the secondary access level must be valid or set to none.
AL001 Secondary
None
Use the [1] and [3] keys to scroll the secondary access level selection and press [ENTER] to select the access
level displayed. For more information about the list control data entry refer to the section List Control Data Entry
(see page 335). Programming a secondary access level with the current access level being edited will perform
no function.
Area Arming Group
An access level that has areas assigned to the arm group will only be able to arm those areas unless the user
has these areas also assigned to the disarm group.
AL001 Arm Grp
All Areas
Use the [1] and [3] keys to scroll the area arming group selection and press [ENTER] to select the area group
displayed. For more information about the list control data entry refer to the section List Control Data Entry (see
page 335).