Specifications

32 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
For a menu group to also allow access to the programming of door groups, area groups, menu groups and
access levels the user sub menu option must also be enabled.
y Disabled the menu group will not allow access to the user programming menu.
Option 3 - Event Review Menu
y Enabled the menu group will allow a user access to the event review menu [MENU, 3].
y Disabled the menu group will not allow access to the event review menu.
Option 4 - Installer Menu
y Enabled the menu group will allow a user access to the installer programming menu [MENU, 4]. All users
that require to program modules and installation parameters must have this enabled for the menu group
assigned to their access level.
The installer menus also contain advanced sub menus and to access these menu items the advanced sub
menu items must be turned on for the menu group assigned to the users access level.
y Disabled the menu group will not allow access to the installer programming menu.
Option 5 - View Menu
y When enabled the menu group will allow a user access to the status view menu [MENU, 5].
The view menu will allow a menu group to access the alarm memory, bypass status and trouble status
information for the system.
y Disabled the menu group will not allow access to the status view menu.
Option 6 - Time Menu
y When enabled the menu group will allow a user access to the time menu [MENU, 6]. This allows the
programming of time related functions and the system time in the controller.
If a user requires access to the programming of schedules and daylight saving configuration parameters the
menu group must also have the time sub menu option enabled.
y Disabled the menu group will not allow access to the time menu.
Option 7 - Bypass Zone Menu
y When enabled the menu group will allow a user access to the bypass zone menu [MENU, 7]. This will allow
a user access to zones that can be bypassed in the system.
y Disabled the menu group will not allow access to the bypass zone menu.
Option 8 - System Menu
y When enabled the menu group will allow a user access to the system menu [MENU, 8]. This will allow a
user access to the system functions used to generate a test report, dial the remote computer that is
programmed or answer an incoming call from the remote computer.
y Disabled the menu group will not allow access to the system menu.
Menu Group Sub Menu Options
Options that relate to ability for this menu group to access the sub menu items that relate to main menus that
are selected including arming and special keypad control functions.
MG001 Sub
[-2345678]
To modify options, follow the settings as explained in section Entering Data Options (see page 336). Use the
relevant key from 1 to 8 to toggle the state of the option.
Option 1 - Advanced Sub Menu
y Enabled the menu group will allow a user access to the advanced sub menus under the installer menu
[MENU, 4, 8].