Specifications

314 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Zone Number Description Type Group
CP001:25 Service 1 Stopped Hardware Fault System
CP001:26 Service 2 Stopped Hardware Fault System
CP001:27 Service 3 Stopped Hardware Fault System
CP001:28 Service 4 Stopped Hardware Fault System
CP001:29 Reserved * *
| | | | | | | |
CP001:64 Reserved * *
In the above table a '*' indicates that the trouble zone will not generate a system trouble as by default it is not
assigned a trouble type or group. This can be done if required but is not recommended.
LCD Keypad
The following lists the trouble zones that operate on the LCD keypad module. The LCD keypad module has 8
trouble zones.
Zone Number Description Type Group
KPxxx:01 Module Tamper System Tamper System
KPxxx:02 Power Trouble Power Fault General
KPxxx:03 Panic * *
KPxxx:04 Duress * *
KPxxx:05 Door Left Open Left Open Access
KPxxx:06 Door Forced Open Forced Door Access
KPxxx:07 Invalid Code Lockout Attempts Access
KPxxx:08 Module Offline Module Offline System
In the above table a '*' indicates that the trouble zone will not generate a system trouble as by default it is not
assigned a trouble type or group. This can be done if required but is not recommended.
When using the reference table the LCD keypad address should be used in place of the 'xxx'.
Zone Expander
The following lists the trouble zones that operate on the zone expander module. The zone expander module has
8 trouble zones.
Zone Number Description Type Group
ZXxxx:01 Module Tamper System Tamper System
ZXxxx:02 AC failure Power Fault General
ZXxxx:03 Low Battery Power Fault General
ZXxxx:04 Aux Failure Power Fault General
ZXxxx:05 Bell 1 Cut/Tamper Bell/PGM Fault General
ZXxxx:06 Bell 2 Cut/Tamper Bell/PGM Fault General
ZXxxx:07 Bell 1 Over Current Bell/PGM Fault General