Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 31
Menu Group Name
If the selected menu group has a name associated (some menu groups do not have a name associated with
them) the name programming screen will be shown.
MG001 Name
All Menus
To scroll menu groups by name use the [Ð] and [Ï] keys. To modify or enter a new name for the selected menu
group use the keypad as explained in section Entering Text and Names (see page 333) and press [ENTER].
By default the menu group name will be prefixed by an '*' this indicates that the name is an editable name in the
system.
Operating Schedule
The operating schedule for the menu group determines when the menu group is valid and if it will use a
secondary menu group if the schedule is not valid. A schedule is a series of times and days that can be
programmed to prevent the operating of functions based on a 7 day week and 24 hour clock. For more
information on the programming of the schedule refer to the Schedule Programming section (see page 272).
MG001 Schedule
None
Use the [1] and [3] keys to scroll the schedule selection and press [ENTER] to select the schedule displayed.
For more information about the list control data entry refer to the section List Control Data Entry (see page 335).
Secondary Menu Group
A secondary menu group can be selected that will be used when the schedule of the menu group that is
programmed is not valid. The schedule of the secondary menu group must be valid. The secondary group
allows very powerful menu controls to be placed on users during certain times of the day.
MG001 Secondary
None
Use the [1] and [3] keys to scroll the secondary menu group selection and press [ENTER] to select the menu
group displayed. For more information about the list control data entry refer to the section List Control Data
Entry (see page 335). Programming a secondary menu group that uses the current menu group being edited will
perform no function.
Menu Group Main Menu Options
Options that relate to ability for this menu group to access the main menu (items 1 to 8).
MG001 Main
[123-5678]
To modify options, follow the settings as explained in section Entering Data Options (see page 336). Use the
relevant key from 1 to 8 to toggle the state of the option.
Option 1 - Area Control Menu
y Enabled the menu group will allow a user access to the area control menu [MENU, 1].
All users that are required to perform area control must have this option enabled for the menu group
assigned to their access level.
y Disabled the menu group will not allow access to the area control menu.
Option 2 - User Menu
y Enabled the menu group will allow a user access to the user programming menu [MENU, 2].