Specifications

300 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Zone
Number
Alarm
Code
Restore
Code
Reporting
Point Number
CP001:28 YC YK 28 Service 1 Fault 5028
CP001:29 YC YK 29 Service 2 Fault 5029
CP001:30 YC YK 30 Service 3 Fault 5030
CP001:31 YC YK 31 Service 4 Fault 5031
CP001:32 UA UH 5032
| | | | | | |
CP001:64 UA UH 5064
Keypad Trouble Zones
The keypad will report trouble zones from 1 to 8 on the first 128 modules, all modules above address KP128 will
be reported using the default code of 9999.
Zone
Number
Alarm
Code
Restore
Code
Reporting
Point Number
KP001:01 TA TH 01 Tamper 5065
KP001:02 UA UH 02 Power 5066
KP001:03 PA PH 03 Panic 5067
KP001:04 HA HH 04 Duress 5068
KP001:05 DH DR 05 Left Open 5069
KP001:06 DF DR 06 Forced Open 5070
KP001:07 JA UJ 07 Locked Out 5071
KP001:08 EM EN 08 Communication 5072
KP002:01 TA TH 01 Tamper 5073
| | | | | | |
KP128:08 EM EN 08 Communication 6088
KP129:01 UA UH 9999
| | | | | | |
KP250:08 UA UH 9999
In the above table a reporting code of 9999 indicates that the zone is outside the maximum zones that can be
reported for the module type.
16 Zone Expander Trouble Zones
The 16 zone expander will report trouble zones from 1 to 16 on the first 32 modules, all modules above address
ZX032 will be reported using the default code of 9999.
Zone
Number
Alarm
Code
Restore
Code
Reporting
Point Number
ZX001:01 TA TH 01 Tamper 6089
ZX001:02 AT AR 02 AC 6090