Specifications

296 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
Analog Input/Output Expander
The Analog expander will report trouble zones from 1 to 8 on the first 2 modules, all modules above address
AE002 will be reported using the default code of 999.
Zone Number Contact ID Code Reporting Point Number
AE001:01 145 (Module Tamper) 949
AE001:02 312 (Analog Voltage Low) 950
AE001:03 312 (Auxiliary Fuse) 951
AE001:04 140 (General Alarm) 952
AE001:05 140 (General Alarm) 953
AE001:06 140 (General Alarm) 954
AE001:07 140 (General Alarm) 955
AE001:08 143 (Module Offline) 956
AE002:01 145 (Module Tamper) 957
| | | | | | | |
AE002:08 143 (Module Offline) 964
AE003:01 145 (Module Tamper) 999
| | | | | | | |
AE250:16 143 (Module Offline) 999
In the above table a reporting code of 999 indicates that the trouble zone is outside the maximum trouble zones
that can be reported for the module type.
SIA Level 2 Standard Zones
The following tables show the reporting codes for the zones when the SIA Level 2 reporting format is used
(Table 000, Default). The standard table is suited to both access control and burglary installations as it allows
the reporting of all points available in the system.
Control Panel Zones
The control panel will report all zones from 1 to 16 using any of the available table configurations.
Zone Number Alarm Code Restore Code Reporting Point Number
CP001:01 BA BR 0001
CP001:02 BA BR 0002
CP001:03 BA BR 0003
CP001:04 BA BR 0004
CP001:05 BA BR 0005
CP001:06 BA BR 0006
CP001:07 BA BR 0007
CP001:08 BA BR 0008
CP001:09 BA BR 0009