Specifications

290 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
In the above table a reporting code of 999 indicates that the zone is outside the maximum zones that can be
reported in some cases the zone number will reflect the module address that the zone was activated from to aid
in service.
Keypad Zones
The keypad will report zones from 1 to 4 on the first 2 modules, all modules above address KP002 will be
reported using the default code of 999.
Zone Number Contact ID Code Reporting Point Number
KP001:01 130 (Burglary) 017
KP001:02 130 (Burglary) 018
KP001:03 130 (Burglary) 019
KP001:04 130 (Burglary) 020
KP002:01 130 (Burglary) 021
KP002:02 130 (Burglary) 022
| | | | | | | |
KP002:04 130 (Burglary) 024
KP003:01 130 (Burglary) 999
| | | | | | | |
KP250:04 130 (Burglary) 999
In the above table a reporting code of 999 indicates that the zone is outside the maximum zones that can be
reported for the module type.
16 Zone Expander
The 16 zone expander will report zones from 1 to 16 on the first 20 modules, all modules above address ZX020
will be reported using the default code of 999.
Zone Number Contact ID Code Reporting Point Number
ZX001:01 130 (Burglary) 025
ZX001:02 130 (Burglary) 026
ZX001:03 130 (Burglary) 027
ZX001:04 130 (Burglary) 028
ZX001:05 130 (Burglary) 029
ZX001:06 130 (Burglary) 030
ZX001:07 130 (Burglary) 031
ZX001:08 130 (Burglary) 032
ZX001:09 130 (Burglary) 033
ZX001:10 130 (Burglary) 034
ZX001:11 130 (Burglary) 035
ZX001:12 130 (Burglary) 036
ZX001:13 130 (Burglary) 037