Specifications

PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE 29
Option 5 - Automatic Primary Area Disarm
y When enabled and the user logs in to the keypad, the primary area associated with the keypad
automatically disarms. The keypad's primary area must belong to the user's disarm area group. This feature
does not automatically cancel the arming process of an area that was previously started.
y Disabled the keypad will not perform any action when the user logs in.
Option 6 - User Area Disarm On Login
y When enabled on login, the area assigned to the user automatically disarms. The user area must belong to
the user's disarm area group. This feature does not automatically cancel the arming process of an area.
y Disabled the keypad will not perform any action when the user logs in.
Option 7 - User Troubles Acknowledgment
y When enabled the user can acknowledge and clear user troubles that are stored in memory for an area by
using the [ENTER] key when viewing these troubles in the View menu.
For this option to operate correctly the user must have access to the View menu and the Trouble
Acknowledgment option must be turned on.
y Disabled the user can not acknowledge user troubles.
Option 8 - System Troubles Acknowledgment
y When enabled the user can acknowledge and clear system troubles that are stored in memory for the entire
system by using the [ENTER] key when viewing these troubles in the View menu.
For this option to operate correctly the user must have access to the View menu and the Trouble
Acknowledgment option must be turned on.
y Disabled the user can not acknowledge system troubles.
User Special Options
Options that relate to special functions of the user can be set using option entry.
UN00001 Special
[1-34----]
To modify options, use the follow the settings as explained in section Entering Data Options (see page 336). Use
the relevant key from 1 to 8 to toggle the state of the option.
Option 1 – User Area is a Group
When this option is enabled the users area selection screen will change to a group selection allowing multiple
areas to be controlled by the user area group configuration.
y Enabled the user area will be set as a group.
y Disabled the user area selection will be an individual area.
Option 2 - Reserved
y Reserved do not modify.
Option 3 - Super User Code
y Enabled the user is assigned a super user status that allows them to override dual code functions and
anti-passback violations.
y Disabled the user does not have super user status.
Option 4 - User Can Modify Own Code
y Enabled the user will be able to modify their own code. The user must have access to the user menu. The
user can not modify any access or other functions.
y Disabled the user can not modify their own code.