Specifications

28 PRT-CTRL-SE Protege System Controller Reference Manual | PRT-CTRL-SE
User Language
Each User can be programmed with a default language that will be loaded by the System Controller when they
log into a keypad.
UN00001 Language
None
If no language is selected the default panel language will be displayed.
User Miscellaneous Options
Options that relate to general functions of the user can be set using option entry.
UN00001 Misc
[1-34----]
To modify options, use the follow the settings as explained in section Entering Data Options (see page 336). Use
the relevant key from 1 to 8 to toggle the state of the option.
Option 1 - Greeting Mode
y Enabled the user will be presented on the keypad screen with a time of day greeting when they log in to the
keypad. For example "Good Morning Mr. Smith" or "Good Afternoon Mr. Jones".
y Disabled the user will not be shown a greeting when they log in to the keypad.
i
This option when enabled can be overridden by the same option in the menu group. To control this
option per individual user disable the option in the menu group and assign this option for each user
that requires a greeting message displayed on login.
Option 2 - Menu Mode
y Enabled the user will be taken directly to the menu. Normally a user will be shown the status of the current
area that the keypad belongs to however this feature allows users that can not perform any area commands
or that are more likely to perform menu commands to be taken directly to the menu without pressing the
[MENU] key when they log in.
y Disabled the user will be taken to the primary area status screen if they have access to the programmed
area.
Option 3 - Alarm Acknowledgement Allowed
y Enabled the user can acknowledge and delete alarms that are stored in memory for an area by using the
[ENTER] key. To acknowledge alarms, the user must have access to the View menu. The area where the
alarm occurred must also belong to the user's disarm area group.
y Disabled the user will not be able to acknowledge alarms.
i
This option when enabled can be overridden by the same option in the menu group. To control this
option per individual user disable the option in the menu group and assign this option for each user.
Option 4 - Show Alarm Memory On Login
y Enabled the user when logging in to the keypad will be displayed any existing alarm for the keypad's
primary area. If an alarm occurred in any other area, the alarm memory is sent to the alarm buffer, which
can be viewed through the View menu. To view the alarm memory, the user must be allowed to access the
View menu. The keypad's primary area must also belong to the user's disarm area group. If you want to
acknowledge the alarm, the Alarm Acknowledgment option must be turned on.
y Disabled the keypad will take no action if alarm memory is present when a user logs in.
i
This option when enabled can be overridden by the same option in the menu group. To control this
option per individual user disable the option in the menu group and assign this option for each user.